Overview
Position: Front Right
Bolt-Center: 69.1mm (2.72")
Caliper Body: 2-Piece
Piston DIA: 32mm
Piston Quantity: 4
Piston Material: Aluminum
Disc Height: 32-36mm
Caliper Material: Billet Aluminum
Finish: Anthracite Black Hard Anodized
Weight (w/o pads): 1.86 lb. (845g)
Brake Pads: Included (HH Rated Sintered)
Offset: 34.1mm
Brake Fluid: DOT 4
Note: Single Caliper
Brembo P/N: 120.B814.79
See 'Fitment' tab for additional models listing
Touring
Road King – FLHR (08-20)
Road King Classic – FLHRC (08-13)
Road King CVO – FLHRSE (08-14)
Road King Special – FLHRXS (17-20)
Electra Glide – FLHT (08-20)
Electra Glide Classic – FLHTC (10-13)
Electra Glide Ultra Classic – FLHTCU (08-19)
Electra Glide Ultra Classic Low – FLHTCUL (15-16)
Electra Glide Ultra Classic CVO – FLHTCUSE (08-13)
Electra Glide Ultra Limited – FLHTK (10-20)
Ultra Limited Low – FLHTKL (15-19)
Limited CVO – FLHTKSE (14-20)
Street Glide – FLHX (08-20)
Street Glide Special – FLHXS (14-20)
Street Glide CVO – FLHXSE (10-20)
Road Glide – FLTR (08-09)
Road Glide Limited – FLTRK (2020)
Road Glide CVO – FLTRSE (09-11)
Road Glide Ultra – FLTRU (11-19)
Road Glide Ultra CVO – FLTRUSE (2015)
Road Glide Custom – FLTRX (10-20)
Road Glide Special – FLTRXS (15-20)
Road Glide Custom CVO – FLTRXSE (12-13)
Road Glide CVO – FLTRXSE (18-20)
V-Rod
V-Rod – VRSCA (06-07)
V-Rod – VRSCAW (08-10)
Night Rod – VRSCD (06-08)
Night Rod Special – VRSCDX (07-17)
Muscle – VRSCF (09-17)
Street Rod – VRSCR (06-17)
V-Rod CVO – VRSCSE (2006)
VRSCX – VRSCX (2007)
Trike
Tri Glide – FLHTCUTG (09-20)
Tri Glide CVO – FLHTCUTGSE (2020)
Street Glide Trike – FLHXXX (10-11)
Freewheeler – FLRT (19-20)
The new Brembo “.484” caliper aims to meet the needs of those who want to improve their braking system performance, giving the bike a strong Café Racer connotation.
This caliper is made entirely from billet, starting with a block of aluminum machined with the most modern CAM technologies available. The two semi-calipers are then joined with three steel screws located within the wheel side. The caliper body houses four 32 mm diameter pistons.
The name “.484” is derived from the displacement of an individual caliper piston measured in cubic inches, typical of the V-Twin market. Finishing of the caliper is obtained with an anthracite black hard oxidation treatment, whereas the prominent Brembo logo, is placed at the top of the piston on the disc entry side.
The axial mounting and fixing centers (69.1mm) of the “.484“ make it compatible with the majority of custom forks offered on the market, with no need for any modifications to the machine. The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
The Brembo logo is embossed. The product includes sintered brake pads which represent the absolute best quality available on the market. The package also contains an instruction manual, a set of Brembo stickers, and extremely useful heat adhesives used in racing to control caliper operating temperature, which are indicative of the product’s racing nature.